D&S IQ 2.0 Soft Touch

When it comes to tackling the demands of everyday car wash customers, the IQ 2.0 Soft Touch delivers.  Ingenious technology, remarkable wash quality and even greater efficiency make this D&S wash Smarter, Cleaner and Greener.

A high-tech 3-D scan profile of every vehicle is captured along with “mapping” details like the luggage rack and spoilers.  The IQ 2.0 washes best because it knows the unique size and shape of every vehicle being washed in the bay.  With the FAST IQ 2.0, you will really appreciate the wash times and the ability to thoroughly clean more vehicles than ever before.  Wash speed and menu programming is also fast and easily managed from your laptop, iPad or smart phone.  The tech savvy IQ 2.0 is web enabled so you can get basic information like daily wash counts, service issues and faults.  Program updates and troubleshooting is easily performed over the web.  D&S leads the way with the latest proprietary software and more powerful microprocessor to keep you connected at all times.  Full color touch screen included!

The IQ 2.0 provides a highly efficient and safe custom wash for everything from Mini Coopers to dually and full-sized pickup trucks.  We’re soft, but not understated.  Thanks to soft closed cell foam brushes, the IQ 2.0 quietly and gently cleans the vehicle.  Longer brushes reach those hard to clean areas at the rear of the vehicle.  The Pre-Soak and Tri Color lather covers every vehicle in a bath of foam cleaner.  The IQ 2.0 is packed with features and options to put on a show for the kids, clean the family vehicle like never before, and increase your profits.

The fit and nimble IQ 2.0 delivers on performance while consuming less power, water and chemicals.  In fact it boasts one of the lowest costs of operation available.  Earn more washing the same amount of cars and achieve a healthier bottom line with the IQ 2.0.  Rising energy prices created a need for energy-efficient motor control.  The IQ 2.0 electric drive provides the solution to control costs.  Low amp electric driven motors with VFD control manage input power based on system demand and use only the energy required by the driven equipment.  Eliminate environmental concerns now and in the future with the eco-friendly design of the IQ 2.0.  It’s energy efficient, and its decreased wastewater effluent reduces pollution.  Connect to any reclaim system for recycle and gray water reclamation and go green.

IQ 2.0 Soft Touch Featuresds_iq_2_energy_chain-300x219

  • Lightweight Dual Carriage Drive with Synchronous Omega Belts
  • 3 Gentle, Soft Foam Brushes
  • 3-D Vehicle Mapping and Profiling
  • Invisible Treadle Design
  • Self-Cleaning Rail & Light Grid Rinse
  • On-Board Wheel Cannon™ with Chemical Applicator
  • Dynamic Energy Chain for Power and Chemical Distribution
  • Electric Motors with VFD Control
  • Ultra-compact Pump Stand
  • Color Touch-Screen Interface
  • Web Based Notifications and Access
  • Intelligent Door Controls
  • 7’6″ Vehicle Clearance
  • Cold Weather Shutdown
  • “Plug & Play” Installation
  • 1 Year Limited Warranty
  • 2-Year “NO-WORRY” Warranty (optional)

IQ 2.0 Soft Touch Unexpected Extrasds_iq_2_foam_wax-300x219

INVISIBLE TREADLE
Cars virtually line up in the bay due to the IQ 2.0 vehicle positioning system.  Getting in position is easier, and with no guide rails or hardware on the floor, the bay has a clean “open” look.  Together with in-bay signage and IQ Voice Announcer™, the Invisible Treadle works to enhance the total customer experience.

IQ WHEEL CANNON
The IQ 2.0 touch free on-board wheel cleaner is powerful and precise, blasting away brake dust and road grime to effectively clean up to 20″ rims with a wide and powerful spray pattern.

FOAMING WAX Add an unprecedented wax and shine to your top wash and give your customers an unforgettable experience.  IQ 2.0 Foaming Wax protects and shines.  It’s totally safe for all finishes.

Dimensions

Vehicle Height (max) 7’6″ (90″)
Vehicle Width (max) 110″
Carriage Width 144″
Carriage Height 110″
Carriage Weight 750 lb
Chemical Pump Stand 24’w x 32’d x 53″h


Building Requirements

Overhead rails 32′ (standard length)
Bay height (minimum) 10′
Bay width (minimum) 14′
Bay length 35′ (minimum for 22′ vehicles)
Bay length with dryers +3′ to +5′ (per dryer manufacturer)
Note: Bays may be shorter, but may sacrifice washability on longer vehicles.


Electrical Requirements

208 – 230 V / 60 Hz / 3 Phase
Carriage 20 amps
Chemical pump 10 amps
High pressure pump 20 amps
Air compressor 20 amps
110 V / 60 Hz / 1 Phase
Control power / lights 10 amps


Air Requirements

5 cfm @ 90 psi Filtered dry air for chemical aeration


Water Requirements

Cold soft 3/4″ from water softener @ 50 psi 10 gpm
Hot soft 3/4″ (3 gpm) from water heater
Spot free 1-1/2″ (10 gpm) from RO storage tank
RO reject or reclaim 3/4″ (8 gpm) from storage tank

IQ 2.0 Soft Touch System Wash PackagesIQ_Soft_Touch_wheel_cannon-300x219

These IQ 2.0 Soft Touch System Wash Packages can be bundled into an economical package to meet your specific needs.

  • Off Board Undercarriage
  • Bug-Off Applicator (Floor Mounted)
  • Pre-Soak or Detergent 1 & 2
  • Wheel Cannon & Chemical Applicator
  • Tri Gloss System
  • LED Foaming Wax Rain Curtain
  • Rain Curtain Rinse
  • Quick Rain
  • Spot Free Rinse
  • Dryer

D&S IQ 2.0 Touch Free

The D&S IQ 2.0 Touch Free Car Wash System with intelligent, 3D profiling technology provides a custom, high-quality wash for every vehicle, giving your customers the cleanest, most reliable wash available on the market today.

The ability to completely scan and map out a vehicle’s size and shape is the heart of what makes the IQ 2.0 Touch Free revolutionary and unique.  This approach to washing enables the IQ 2.0 Touch Free Car Wash to identify important areas of the vehicle (windshield, front grill, back glass, etc.) so that each wash provides optimal cleaning with minimum power, water, and chemical consumption.

The IQ 2.0 Touch Free Car Wash System is so advanced, it will simplify your work day with its proprietary software precisely controlling every wash.  High-impact turbo nozzles effectively clean the vehicle using a lower volume of water.  If a technical issue should occur, the IQ 2.0 system automatically sends an alert to your smartphone or email account — and to your distributor as well! — to quickly resolve the issue and maximize your equipment’s uptime.

Check out the IQ 2.0 Touch Free Base Model Features, Specifications, and System Options to see how the feature-packed IQ 2.0 Car Wash System from D&S is The Smarter Choice® for you and your car wash business!

IQ 2.0 Touch Free Base Model FeaturesIQ_belt_drive-300x219

  • Vehicle mapping and profiling technology
  • Color touch-screen interface
  • Web-based notifications and access
  • Intelligent door controls
  • Pickup dryer cancel logic
  • Stainless steel and lightweight aluminum construction
  • High-impact turbo nozzles
  • Synchronous belt drive
  • Invisible Treadle™
  • All electric drive  with VFD motor control
  • Ultra-compact pump stands
  • 7’6″ vehicle clearance decal
  • Integrated voice and horn instructions
  • Spot free and one additional water source connection
  • Standard 1 year parts warranty
  • Up to 15′ bay width wall mount overhead rail system
  • Dynamic energy chain
  • Off board Stop/Go/Back-up light in bay
  • 200 PSI chemical pumping system
  • HydroFlex injector system (includes foaming detergent applicator, clear coat applicator, and spot-free control)

Dimensions

Vehicle Height (max) 7’6″ (90″)
Vehicle Width (max) 110″
Carriage Width 144″
Carriage Height 110″
Carriage Weight 750 lb
Chemical Pump Stand 24’w x 32’d x 53″h
High Pressure Pump Stand 32’w x 35’d x 63″h


Building Requirements

Overhead rails 32′ (standard length)
Bay height (minimum) 9′
Bay width (minimum) 14′
Bay length 30′ (minimum for 22′ vehicles)
Bay length with dryers +3′ to +5′ (per dryer manufacturer)
Note: Bays may be shorter, but may sacrifice washability on longer vehicles.


Electrical Requirements

208 – 230 V / 60 Hz / 3 Phase
Carriage 20 amps
Chemical pump 10 amps
High pressure pump 60 amps
Air compressor 20 amps
110 V / 60 Hz / 1 Phase
Control power / lights 10 amps


Air Requirements

5 cfm @ 90 psi Filtered dry air for chemical aeration


Water Requirements

Cold soft 3/4″ from water softener @ 50 psi 25 gpm
Hot soft 3/4″ (3 gpm) from water heater
Spot free 1-1/2″ (10 gpm) from RO storage tank
RO reject or reclaim 3/4″ (8 gpm) from storage tank

IQ 2.0 Touch Free System OptionsWheel_Cannon-300x219

These IQ 2.0 Touch Free System Options can be bundled into an economical package to meet your specific needs.

  • Wheel Cannon and Wheel Applicator
  • Two Additional Water Sources
  • Off Board Undercarriage
  • Tri-Color Foam System
  • Bug-Off Applicator (Floor Mounted)
  • Quick Rain ® Weather Shield
  • Column Mounted Rail System
  • Spare Parts Kit
  • Cold Weather Shut Down
  • Custom Image Package
  • Marquis Scrolling Message Sign
  • 2 Year “No Worry” Parts Warranty
  • LED Foaming Wax Rain Curtain

D&S i5000 Touch Free

The powerful i5000 Touch Free In Bay Automatic Car Wash by D&S is designed with proven technology adapted from our high-performance Quicksilver and D&S 5000 systems.

The i5000 Touch Free offers flexibility of recipes, has fewer moving parts resulting in less maintenance, and is more energy efficient due to its lightweight construction.

The i5000 Touch Free is built for car washes and c-stores with small bays.  The machine produces a sleek “open bay” look, is quick and easy to install, and is simple to operate.  See all of the Product Features, Specifications, and Options. Plus watch a video of it in action!

For current D&S 5000 owners, the i5000 Touch Free is the perfect rehab solution.  The gantry can be retrofitted to any existing D&S 5000 arch and pump stand.  In addition, the gantry is 3 inches wider than the D&S 5000 (between spinner tips) to accommodate wider vehicles.

Check out the i500 Touch Free Base Model Features, Specifications, and System Options.  The new i5000 Touch Free In Bay Automatic Car Wash System delivers great performance and reliability.  It’s smarter for more profit!

i5000 Touch Free Base Model Features

Space-Efficient

  • Perfect for small bays
  • Pumpstand requires only 12 square feet
  • Wall-mountable hydraulic power pack

Construction & Functionality

  • Lightweight aluminum construction
  • Self-driven side spinners (no belts/pulleys)
  • Springless gantry drive
  • Single-pump, pumpstand
  • Hydra-Flex injector system
  • Intuitive, simple door-mounted touch screen interface

Flexible Wash Programming
Recipes can include 1 to 10 passes — for each pass, the following parameters are programmable:

  • Wash function
  • Speed (normal or slow)
  • Stopping point (top or bottom)
  • Dwell time
  • Soak time

Enhanced Safety Logic

  • With the Intelligent Door Controller the door eyes enhance safety by preventing the gantry from coming down if a vehicle is blocking the door eyes
  • Blockage of one of the gantry eyes will not terminate the wash; rather the system will remember that location and continue the wash without going past that point
  • Active Telco eyes throughout wash

Dimensions

Gantry arches 266″
Gantry 11″ w x 8’2″ h
Vehicle height (maximum) 7′
Vehicle width (maximum) 91″ (mirror tip to mirror tip)
Average wash time 3 minutes (typical)
Water consumption 45 to 65 gallons per wash (typical)
Pump pressure 1100 psi


Building Requirements

Bay dimensions (minimum) 14′ w x 25′ l
Bay height (minimum) 9′ (10′ with dryer)
Equipment room (minimum) 100 sq ft
Pump stand footprint 3′ w x 4′ l


Electrical Requirements

Power (without dryers) 125 amp / 3 ph @ 208 V
Pump motor 25 hp / 208—230 V / 3 hp / 60 hz
Hydraulic power pack 3 hp


Air Requirements

1/2″ supply line 10 cfm @ 90 psi of filtered, dry air


Water Requirements

Cold soft 1″ cold soft, 35 gpm @ 50 psi
Hot soft 3/4″ hot soft, 5 gpm @ 50 psi
Spot free 1-1/2″ spot free, 10 gallons per wash

i5000 Touch Free System Options

These i5000 Touch Free System Options can be bundled into an economical package to meet  your specific needs.

  • Undercarriage with Mosmatic Wheel BlasterDS-i5000_colors-300x140
  • Intelligent Door Controller
  • Quickrain™ Windshield Protectant
  • Bug Off™
  • Tri Gloss™ Polymer Silicone Foam Polish in Bright Pink, Blue, and Yellow
  • Clean and Easy Treadle
  • Blowdown with or without Freeze-Not
  • Vertical Presoak
  • Automatic Hot Water Temperature Control
  • Air Treadle
  • Reclaim Compatibility
  • Color Options Shown

D&S Quicksilver Touch Free

The D&S Quicksilver Touch Free In Bay Automatic Car Wash System is quick, reliable, and appealing.

The Quicksilver Touch Free takes clean to a higher level with a revolutionary car wash system that features imaginative design and a fully customizable wash process with state-of-the-art vehicle sizing, oscillating top nozzles, power blaster enhancement, 20 or 35 gpm chemical injection pumping system, on-board 2 hp hydraulic system, and simple laptop PC control.

Check out the Quicksilver Touch Free Base Model Features, Specifications, and System Options to see how the Quicksilver Touch Free can help increase your car wash business revenue.

Quicksilver Touch Free Base Model Features

  • Stainless steel and fiberglass construction
  • Vehicle sizing
  • Energy chain and track
  • Oscillating top nozzles
  • Dual revolving side wands
  • Foaming pre-soak (shower heads)
  • Power Blaster™ technology
  • Rocker Blaster™ system
  • Variable speed hydraulic design
  • Self-contained pump unit
  • Panel-mounted LED interface
  • On-board hydraulic system

Dimensions

Carriage Drive Rails 30′
Carriage Height 9′ 6″
Carriage Width 144″
Vehicle Height (maximum) 7′ (84″)
Vehicle Width (maximum) 110″


Building Requirements

Bay length (minimum) 32′
Bay width (minimum) 14′
Bay height (minimum) 10′
With on-board dryers 35′ l x 14′ w x 12′ h
With off-board dryers 35′ l x 14′ w x 10′ h
Note: Bays may be shorter, but may sacrifice effectiveness on longer vehicles.


Electrical Requirements

208 – 230 V / 60 Hz / 3 Phase
Carriage/Bay 20 amps with dedicated neutral
Pump unit 60 amps / 20 gpm; 100 amps / 35 gpm
Pump/motor 15 hp / 60 hz (20 gpm); 30 hp / 60 hz (35 gpm)
Air compressor 20 amps
110 V / 60 Hz / 1 Phase
Control power / lights 10 amps


Air Requirements

14 cfm @ 85 psi Filtered dry air for chemical aeration


Water Requirements

Cold soft 1-1/2″ from water softener @ 50 psi
Hot soft 3/4″ (3 gpm) from water heater
Spot free 1-1/2″ (10 gpm) from RO storage tank
RO reject or reclaim 1-1/2″ (8 gpm) from storage tank
Pump pressure 1200 psi

Quicksilver Touch Free System Options

These Quicksilver Touch Free System Options can be bundled into an economical package to meet  your specific needs.

  • On-Board Dryers
  • TriGloss ® High Quality Polymer Silicone Foam Polish in Bright Pink, Blue, and Yellow
  • Multi-Color Foam
  • Quickrain™ Windshield Surface Protectant
  • Pneumatic In-Position Treadle
  • Tire Cleaner and Wheel Blaster System
  • Undercarriage
  • 35 gpm Pump
  • Spot Free Rinse System
  • Cashier Console
  • Lighted Display Menu Sign
  • Winter Package
  • Reclaim Compatibility
  • Custom Image Packagey

Contact Mid-West Equipment Sales Today!

contact us